VISOCOLOR® ECO Chlorine 2Principle:
Colorimetry with colour comparison card
• visual and photometric evaluation (with PF-11 / photino)
• environment-friendly, without toxic reagents
• economically priced
• convenient handling
• higher accuracy and sensitivity
• with pictographic instructions
• reagent bottles with clear dosing instructions
• compensation of turbidities and colours
• refill packs available
Colorimetric determination of free and total chlorine
At a pH value of 5 – 6 free chlorine reacts with N,N-diethyl-1,4-phenylene diamine (DPD) to form a red-violet dye. In the presence of iodide ions the content of total chlorine can be determined, too. (Reaction principle is analogous to APHA 4500CL G & DIN EN ISO 9963-1)
| Data and ordering information | |
| Cat. No. | 931 015 (931 215) |
| Type | colorimetric test kit (refill pack) |
| Range | <0.1 0.1 0.2 0.3 0.4 0.6 0.9 1.2 2.0 mg/l Cl2 |
| Sufficient for | 150 determinations |
| Shelf life | at least 18 months |
| Sea water suitability | yes |
| Detectable with PF-11 | yes |
The addition of chlorine to swimming pools, water reservoirs and water mains is an approved procedure to rid the water of germs. With the correct dose harmful microorganisms are destroyed, many impurities removed and the growth of algae is prevented. However it is imperative that the chlorine content is regularly checked, since excessive chlorine not only impairs the smell and taste of the water but can be hazardous.
One distinguishes between free chlorine and bound chlorine (chloroamines); the sum of both is called total chlorine.
ไฟล์ที่เกี่ยวข้องกับผลิตภัณฑ์
